Play with nadir

I usually mosaic, use unipod or magnet stand and erase me, mirror the nadir, or clone/draw it away if nice photo, once tried a 9 cm nadir plate.  All used Photo Editor ❨Macgyver❩

 

Patching demo with Photo Editor (Android Macgyver) 

Erase yourself in 3 minutes ❨Photo Editor ❨Macgyver❩❩

Need 2 Theta photos ❨unipod/tripod supported, taken twice, you stand at different position, mind your shadow❩.

Open photo 1 with Photo Editor ❨Macgyver❩ - I am the red SC in the sample

Paste photo 2, use brush to select or brush+invert to erase yourself from photo 2 and apply

The 1st set of sample is brush+invert.  I am erased from the photo.

The 2nd set of sample is brush.  2 ThetaSC-Me are resulted.

https://theta360.com/s/pT40voH7O7SjFh7kWIhC82Xu0

https://theta360.com/s/slfYuJ5jTHDgcc21PqChXFOUe

Do all other editing (e.g. level, color, contrast, mosaic, blur, etc) before you save the final photo, this can avoid further JPG quality deterioration.

Remember to save 100% JPG retain metadata.

Add a premade nadir logo in 1 minute with Photo Editor ❨Macgyver❩, logo premade with Theta Converter Pro and Photo Editor ❨Macgyver❩ in 4 minutes

(This preparation is good only if your logo size and position won't change, e.g. Never care about big thumb or tripod, or your logo is big)

PREARATION
(1)  ❨Photo Editor❩ create a 2:1 black image e.g. 5388 x 2688
❨2❩   Paste your logo in the middle and save it
❨3❩   ❨Theta Converter Pro❩ rotate the saved image 90 degree down
(4)   ❨Photo Editor❩  open the down 90 degree image> Effect> Color Replace RBG, set color to opacity 0% color code #00000000, touch the black area to make it transparant
❨5❩   Save to PNG, (save to JPG will loss the transparancy)
Done.

Add logo to any 360 photo
(1)  ❲Photo Editor❳ Open a photo
(2)   Paste the transparent logo
(3)   Save 100% retain metadata JPG
Done

Adding Nadir Logo in 5 Mins with Theta Converter Pro and Photo Editor ❨Macgyver❩, revised

❨1❩  Image 0, remove metadata with Photo Editor ❨Macguyvr❩: save to picture remove metadata> (0 rotate) Image 1 [create a base image with the same 0 degree orientation - Theta converter will rotate the image based on metadata even before you click the arrows];

(2)   Image 1, Theta converter
> 90 degree up> image 2
Image 2, photo editor place logo, save 100% jpg retain meta> image 3;

❨3❩   Image 3, Theta converter, down 90 degree> image 4;

❨4❩   Image 0, photo editor, paste image, select image 4, option 'B' brush, brush the bottom nadir logo area only> save new file> image 1B.  This file retained the least rotate-compressed at zenith-decompressed top to middle part.   This is the final product, saved 100%, metadata retained, is a 1st save [except at the nadir logo, 2nd save].

See the completed sample 360 panorama at
https://theta360.com/s/nHUbjluQZtrBU4eEPhMd8AGnM